AFR-200 Installation & Operation Guide Page 7
Wall Mounting
Warning! Before selecting a mounting location for your AFR-200 Terminal, you must
consider the following:
The mounting surface and hardware must be able to support the unit’s weight 1.75 lbs
The area must be within the specified operating temperature & humidity range (see
Specifications on page 29).
The AFR-200 Face Scan terminal should be mounted in an environment that
avoids the following:
X Heat Source – Direct Sunlight and Humidity
X Rain Water
X Strong Vibration and Shock
X Dust, Corrosive Gas, Steam and Salt Damage
Close proximity to a wall outlet (6 ft.)
If using Ethernet, close proximity to an Ethernet connection (6 ft.) or if connecting via
WiFi check the location for a good signal.
Amano recommends the following wall mounting procedure:
1. Set the AFR-200 terminal face up on a flat surface to avoid scratches on display.
Mounting Bracket
Basic Installation for Time Guardian AFR-200
Mounting Guide
To Next Page
Loading...
