Installation & Operation Guide Page 15 of 48
Punching with proximity card
1. From the Welcome screen place your proximity card in front of the reader. (See figure).
2. Upon verification, the Green LED will momentarily stay on; the screen will briefly display your User ID, Name
and the confirmation "Verified." (see figure) with the voice prompt "Thank you"
Validation Screen
Note: The name, assignments, and current pay period information can be downloaded from Time Guardian to the
MTX-30.
Note: An invalid finger entry will flash the error message,
"FP Verify fail “. The Red LED will momentarily stay on.
Punching with a Password (Pwd)
1. From the Welcome screen enter your User ID using the keypad
and press OK to confirm ID (see figure).
Enter User ID
2. Input your password and ok (see figure).
To Next Page
Loading...
