Installation & Operation Guide Page 24 of 48
How to Enroll a User with a Password
To enroll at the MTX-30 terminal with a password:
1. Press the Menu button to display the main menu.
Main Menu
2. Select User Mange to display the User Manage menu (see figure)
User Manage Menu
3. If enrolling password (note only available on card terminal) Press Up or down keys to select (▲▼) “Enroll PWD” and
press enter (M/┘). After entering new password and confirm password, select OK to save password and OK to save
employee.
or
New User Menu
To Next Page
Loading...
