Amano MTX-30P/A972 - About the Operation Guide; MTX-30 Terminal Models and Software Versions

AMX-301100 ● Copyright © 2012 Amano Cincinnati, Inc. ● Printed in U.S.A. ● Page 3 of 48
About This Operation Guide
This Operation Guide covers the following MTX-30 Fingerprint terminal with Amano Part Numbers for use with Amano
Time Guardian:
MTX – 30 Terminal (Terminal Only no software or CommStik included)
MTX-30F/A965
Finger Print Terminal
MTX-30B/A966
Barcode Terminal
MTX-30M/A967
Magnetic Stripe Terminal (same magnetic cards as MTX-15)
MTX-30P/A968
Proximity Terminal ( will work with MTX-15 proximity cards)
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
MTX – 30 - Package with USB 50 ft. CommStik™ cable, 6ft Cat 5 network cable, and Time Guardian software
MTX-30F/A969
Finger Print Terminal Package
MTX-30B/A970
Barcode Terminal Package
MTX-30M/A971
Magnetic Stripe Terminal Package (same magnetic cards as MTX-15)
MTX-30P/A972
Proximity Terminal Package ( will work with MTX-15 proximity cards)
 AMX-306900 - CommStik 50 ft. (15m) cable only.
 EOE-108540 - Ethernet 6 ft. (1.83m) Cat 5 cable only.
This Operation Guide covers the MTX-30 Terminals for use with Amano Time Guardian for the following versions; Time
Guardian v5.6, and Time Guardian Pro v4.6.
CommStik™ is a trademark of Amano Cincinnati, Inc. Other brand names mentioned herein are for identification purposes only and may be trademarks
of their respective holder