Installation & Operation Guide Page 31 of 48
7.4 Sensor test
The device will automatically test the sensor to see whether it works normally. Press fingerprint to see whether the image is clear
and useable.
Press fingerprint on the sensor window and the fingerprint image will appear on the screen.
Press ESC to exit.
7.5 Real-time clock
The device can automatically test the clock to see whether it works normally.
Press OK to start time and then press OK to stop time.
Press ESC to exit.
7.6 Relay Test
The device can automatically test the relay to see whether it works normally.
Press OK to start time and then press OK to stop time.
Press ESC to exit.
7.7 Record
Employee’s attendance records will be saved in the device. For convenience, query record function is provided.
According to user’s input query condition, the record will be displayed on the screen for user to check.
Enter query attendance, input corresponding information in the query condition input box.
1） When the User ID is blank, all employees are queried.
2） When input a User ID, only this employee’s attendance record can be queried.
After query, the records in accordance with the conditions will be displayed on the screen:
To Next Page
Loading...
