Page 31 of 48 © Copyright 2015 Amano McGann, Inc. 7000_Operations_06302015
[Fig. 5.2A] Forced out of service by operator
Closed Codes:
• A: Forced out of service by operator
• T: Trouble (i.e. malfunctioning hardware or incorrect Paystation
configuration)
• M: Coin note safe full
• E: Out of change
• I: Forced out of service by operation signal
• F: Communication buffer full
• S: Out of service by parameter or communication
• 2: A parameter required to initialize is set incorrectly
5.2.2 Opening Hours Start/End
The Paystation can be set to open and close at designated times. To set the
operational times, navigate to the second First Time Operation page and press
Opening Hours Start/End.
To Next Page
Loading...
