Page 36 of 48 © Copyright 2015 Amano McGann, Inc. 7000_Operations_06302015
Raise the volume with the High button, lower the volume with the Low button, or
set the volume back to default by pressing the Default button. Press Test to test
the volume of the voice announcement. One Return is pressed, the current voice
adjustment volume is saved and used.
6.1.6 GT MT Sub Total
Press the GT MT Sub Total button to print a General Totals/Manual Totals
report. The report is printed via the receipt printer.
6.1.7 Safe Check/Safe Sub Total
The safe contents can be reported or checked by pressing the Safe Check/Safe
Sub Total button from the Operator Operations menu. The denominations of
each coin/note are displayed along with their corresponding counts. To switch
the medium of pay, press To Note Safe Display/To Coin Safe Display. Print a
report of the current coin/note safe totals by pressing Note Safe Sub Total/Coin
Safe Sub Total. Print the previous totals by pressing the bottom-most button
labeled Coin Safe Previous Total or Note Safe Previous Total.
6.1.8 Store Discount Total
The Store Discount report shows all existing store validations and the
percentage discount/surcharge they give. Print a Store Discount report by
pressing the Store Discount Total button from the Operator Operations menu.
The report is printed via the receipt printer. Press the Stop button at any time to
stop printing the report.
6.1.9 Tax Report
The Tax report shows the tax number, total taxable amount for that tax number,
and the total tax collected for that tax number. A total of all of the “Total Tax
Collected” amounts is shown at the end of the receipt.
Press the Tax Report button from the Operator Operations menu to print the
report. The report is printed via receipt printer.
To Next Page
Loading...
