Page 46 of 48 © Copyright 2015 Amano McGann, Inc. 7000_Operations_06302015
8.5 Accessing the Bank Note Recycler
1. Open the Paystation door.
2. Insert the 68 key into the Bank Note Recycler (BNR) lock and simultaneously
push and rotate the key 90 degrees to the left.
3. Once the lock is unlocked, press in the two blue tabs and pull the recycler
out of its drawer using the BNR handle.
The BNR is composed of three cassettes, each with a specific note
denomination. One of the BNR bays is used for the Bank Note Acceptor.
8.6 Adding Money to the Inventory
The only supported method of adding money to the Paystation inventory of
coins and notes is to use the Money Management menu that is contained in the
Manager Operation menu. The Money Management menu consists of two sub
screens: the Coin Unit and the Note Dispenser. This menu is used by the
operator to insert notes into the note recycler or coins into the coin recycler one
at a time. An additional BNR and/or coin tube can be purchased to bulk load the
Paystation.
8.6.1 Adding Coins to the Inventory
1. Hold the blue “P” logo while the Paystation is idle. Hold the logo until the
ticket shutter is opened.
2. Insert the management card. The First Time Operation menu is displayed.
3. Press Next and select To Manager Operation. Enter the management
password.
4. Press Money Management.
5. Press Automatic.
6. Insert the desired amount of coins and verify the on-screen counts are being
incremented with the corresponding coin denomination.
7. Once finished, press Return to stop the coin accept process. A Coin Unit
Total report receipt is printed. Verify the Filled Coins field for each
denomination is equal to the number of coins that were inserted for that
denomination.
To Next Page
Loading...
