Need help?Do you have a question about the Amari Acoustics LP-10MK and is the answer not in the manual?
Place the turntable base on a horizontal surface and adjust feet for levelness, locking with a nut.
Inject lubricant into the lower sleeve of the shaft and place the bearing shaft vertically.
Place the drive belt onto the motor wheel and the aluminum inner platter.
Place the outer platter onto the inner platter, aligning the hole with the shaft.
Attach counterweight, adjust tonearm height for parallel alignment using VTA screw.
Align dust cover holes with steel bars on the base and install gently.
Details on counterweight, VTA screw, and anti-skate screw for tonearm setup.
Information on the cartridge, tonearm lifter, and lock screw.
Location of the On/Off switch, phono amplifier, and motor power connector.
Ports for power input, audio output, MM/MC selection, and ground connection.
Identifies the motor start/stop switch and support foot lock nut.
Connect power supplies, audio outputs, and test motor rotation before proceeding.
Adjust VTA screw until the tonearm is parallel to the platter surface.
Use gauge to set tracking force by adjusting counterweight (2.0g recommended).
Align stylus with protractor disc lines by adjusting cartridge position.
Lower the tonearm slowly onto the record after all adjustments are complete.
40mm thick wood plinth reduces gravity center and absorbs vibrations effectively.
Details on Neodymium magnets, oil pool, and zirconia ceramic shaft for smooth rotation.
Special synchronous 12V motor, low noise, and vibration reduction via O-rings.
Adjust speed (33 1/3, 45 rpm) by manually moving the belt on the dual pulley.
Four adjustable feet with air suspension for leveling and shock absorption.
Switchable MM and MC phono amplifier for versatile cartridge compatibility.
Features a 9-inch tonearm and standard Audio Technica AT-95E MM cartridge.
List of items included with the turntable, such as counterweight and stylus gauge.
Key data including weight, dimensions, platter details, and power supply information.
General| Brand | Amari Acoustics |
|---|---|
| Model | LP-10MK |
| Category | Turntable |
| Language | English |
To Next Page
