19
]Troubleshooting[
Button or knob on the
machine/remote control is
not working properly
Power o the machine and
turn it back on.
Display screen on the
function board is not working
or showing anything while
LED lights are functioning as
usual
Charge the machine’s battery
for at least 8 consecutive
hours before trying to power
it back on. Low battery is
sometimes able to power the
LED lights but will not be able
to power the whole machine
and all its functions.
If any of these issues persist or if any part of the machine becomes
damaged, discontinue use and consult a licensed electrician for repair.
Do not attempt to modify or repair the machine yourself. You can also
contact our customer service department (see back cover).
To Next Page
Loading...
