This document describes the AmazonBasics Glass Electric Kettle, a 1.7 L capacity electric kettle designed for boiling water.

Function Description

The AmazonBasics Glass Electric Kettle is primarily used for boiling water quickly and efficiently. It features a glass body, allowing users to see the water level and boiling process. The kettle is equipped with a switch for operation and an LED circle that illuminates when the kettle is active. It has a lid opening button for easy filling and a spout for pouring. The base of the kettle includes a cable winder for tidy storage and a cable passage for the power cord.

Important Technical Specifications

Voltage/Frequency: 120 V~, 60 Hz
Power Consumption: 1500 W
Capacity: 1.7 L
Dimensions (W x H x D): approx. 6.2 x 9.4 x 8.7 in
Net Weight: approx. 2.5 lbs (kettle only)

The kettle is designed for household use only and is not intended for commercial use. It should be used in dry indoor areas only.

Usage Features

Before First Use:

Check for transport damages.
Clean the product before first use.
Before connecting the product to the power supply, check that the power supply voltage and current rating correspond with the power supply details shown on the product rating label.

Placing the Base:

Use a stable and level surface for the base.
Wind the excess cable onto the cable winder.
Pass the cable through the cable passage.
Connect the plug to a power outlet.

Boiling Water:

Discard the first batch of boiled water from the product to make sure any leftover dust or elements from manufacturing are eliminated.
Push the lid opening button to open the lid.
Fill the kettle with water. The water level must be between the MIN and MAX marks.
Close the lid.
Place the kettle on the base.
Push down the switch. The LED circle at the bottom of the kettle lights up. The boiling procedure begins.
The product switches off automatically when the water is boiling.

Safety Precautions:

Always read all instructions carefully and retain them for future use.
Do not use the appliance for other than intended use.
Do not touch hot surfaces. Use handles or knobs.
To protect against electric shock, do not place cord, plugs, or appliance in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to an authorized service facility for examination, repair or adjustment.
The use of accessory attachment not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
Scalding may occur if the lid is removed during the brewing cycles.
A short power-supply cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord. Extension cords may be used if care is exercised in their use. If an extension cord is used:
- The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
- The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.
The water level must be between the MIN and MAX marks. Note that if the kettle is overfilled, boiling water may spill and may scald the user.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Do not use a cracked container or a container having a loose or weakened handle.
Do not clean container with cleansers, steel wool pads, or other abrasive material.
Do not immerse in water.
Risk of scalding: To prevent water from spilling over, the lid must be closed when pouring.

Maintenance Features

Cleaning and Maintenance:

To clean, wipe with a soft, slightly moist cloth.
Dry the product after cleaning.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.
The spout contains a filter that retains lime deposits and coarse impurities. If the filter is dirty, remove it and rinse it with clear water.
- To loosen the filter: Carefully push the clip of the filter on the inside towards the center.
- To replace the filter: Push it into the opening until the clip locks.

Descaling:

Fill the product to the MAX mark with a 5-15 % vinegar solution.
Switch on the product. Let the solution reach boiling temperature.
Wait until the limescale has dissolved.
Pour the solution into the drain.
Rinse the product thoroughly with clear water.

Warnings:

Risk of electric shock! To prevent electric shock, unplug before cleaning.
Risk of electric shock! During cleaning do not immerse the electrical parts of the product in water or other liquids. Never hold the base under running water.
Risk of burns! The kettle is hot during and after operation. Allow the kettle to cool down before touching. Always use the handle to move the kettle.

Amazon B07JZQ1MXT - Page 3