Amazon FIRE TABLET User Manual

2. Select Low Power Mode to manually turn on Battery
Saver and help extend your tablet’s battery life."
Tip: Battery Saver can be set to turn on automatically once
the device reaches a certain battery percentage. Select
Automatic Low Power Mode and then use the slider to
select the power level that activates Battery Saver."
Get Your Fire Tablet to Charge
Try the following steps to get your device to charge."
Make sure that your environment isn’t too hot or too cold
(tablets are sensitive to extreme temperatures)."
1. Disconnect your device from charging equipment, such
as the power adapter and cable. If you’re using a
wireless charging dock or mat, remove the tablet."
2. Press and hold the power button for 40 seconds or
until your device restarts."
3. Reconnect your device to charge; plug in the cable to
the power adapter and your device, then plug the
adapter into an outlet."
Your Fire tablet indicator light turns orange while charging.
If your tablet still isn’t charging, you may be eligible for a
warranty replacement."
Page 16

Amazon FIRE TABLET Specifications

General

Display Type	IPS LCD
Operating System	Fire OS
Display Size	7 inch, 8 inch, or 10.1 inch (depending on the model)
Display Resolution	1024 x 600 pixels (varies by model)
Processor	Quad-core (varies by model)
RAM	1GB or 2GB (varies by model)
Internal Storage	16GB or 32GB (varies by model)
Expandable Storage	Up to 512GB via microSD (varies by model)
Rear Camera	2MP or 5MP (varies by model)
Front Camera	VGA or 2MP (varies by model)
Wi-Fi	802.11 a/b/g/n/ac (varies by model)
Bluetooth	Yes (varies by model)
Battery Life	Up to 7 hours (varies by model)
Weight	Varies by model
Dimensions	192 x 115 x 9.6 mm (varies by model)