Guide to Reading Books with
VoiceView on Fire Tablet
Use gestures and Text-to-Speech to read and interact with
your book on Fire tablet (FireOS 5 and higher)."
You can switch between two modes of reading: continuous
and non-continuous. Continuous reading will read all pages
in the book, while non-continuous reading will read a page,
character, or word on the page."
•
Start reading"
◦
From your book, swipe down from the top of the
page with two fingers when the reading toolbar is
closed to start reading from the top of the page.
Use an L gesture to start reading from the current
focus point."
◦
When you open a book, Text-to-Speech begins
reading the book and automatically turns the
pages."
•
Switch from continuous to non-continuous reading"
◦
Tap the screen to switch from reading continuously
to reading one page at a time."
◦
When using VoiceView, granularity can be adjusted
to read one word, line, heading, or character at a
time"
◦
Note: Depending on the content being read, some
reading level options may not be available."
•
Enable heading navigation"
◦
Perform a swipe up and down gesture until
“Heading Navigation” is chose as your level of
granularity."
To Next Page
Loading...
