Amazon P3A7EN - User Manual

To Next Page

User Manual

Product Information

Product Model Number

P3A7EN

Product Description

This device is Wi-Fi Indoor Air Quality Monitor (AQM), it will measure five parts of indoor air

quality: temperature, humidity, dust (particulate matter), volatile organic compounds (VOCs),

and carbon monoxide (CO)

- Nominal Operating Voltage and Current: 5V - 1A

- Nominal Operating Temperatures: 0°C to 35°C

Safety and Compliance Information

Using Your Device Around Other Electronic Devices

The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance

with its instructions, may cause interference to radio communications and electronic

equipment. External RF signals may affect improperly installed or inadequately shielded

electronic operating systems, entertainment systems, and personal medical devices.

While most modern electronic equipment is shielded from external RF signals, if in doubt, check

with the manufacturer. For personal medical devices (such as pacemakers and hearing aids),

consult with your physician or the manufacturer to determine if they are adequately shielded

from external RF signals.

There are some places where RF signals could constitute a hazard, such as health care facilities,

and construction sites. If you are not sure, look around for signs indicating that two-way radios

or mobile phones should be turned off.

FCC Compliance Information

Radio Frequency Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Need help?

Do you have a question about the Amazon P3A7EN and is the answer not in the manual?

This document describes the P3A7EN, a Wi-Fi Indoor Air Quality Monitor (AQM).

Function Description

The P3A7EN is designed to measure five key aspects of indoor air quality:

Temperature: Monitors the ambient temperature.
Humidity: Measures the moisture content in the air.
Dust (Particulate Matter): Detects the presence of fine particles in the air.
Volatile Organic Compounds (VOCs): Identifies various organic chemicals that can be harmful.
Carbon Monoxide (CO): Detects the presence of this colorless, odorless, and potentially deadly gas.

Important Technical Specifications

Model Number: P3A7EN
Power: 5V - 1A (Power adapter included in the box).
Nominal Operating Voltage and Current: 5V - 1A.
Operating Temperature: The device is designed to operate within a temperature range of 0°C to 35°C.
Nominal Operating Temperatures: 0°C to 35°C.
Connectivity:
- Wi-Fi: 1x1 SISO 2.4 GHz 802.11 b/g/n HT 20 only.
- Bluetooth (BT): Supports BDR/EDR and BLE (Bluetooth Low Energy).

Usage Features

The device is intended for indoor use to provide continuous monitoring of air quality. While the manual does not detail specific user interface features, as an AQM, it would typically provide real-time data on the measured parameters. The Wi-Fi and Bluetooth connectivity suggest that the device can connect to a network or other devices for data transmission, potentially allowing users to view air quality information remotely via an application or a connected system. The inclusion of a power adapter indicates it is a mains-powered device, ensuring continuous operation without the need for frequent battery changes.

Maintenance Features

The manual does not explicitly detail maintenance features for the device itself, such as cleaning instructions or calibration. However, it provides crucial information regarding safety and compliance, which can be considered a form of "maintenance" for safe and proper operation:

Electromagnetic Compatibility (EMC): The device is designed to operate without causing harmful interference to other electronic equipment and to accept any interference it receives. Users are advised to be aware of potential interference with improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. In case of interference, troubleshooting steps include reorienting the receiving antenna, increasing separation between equipment, connecting to a different circuit, or consulting a radio/TV technician.
Radio Frequency (RF) Exposure: The device complies with FCC and IC RF exposure limits for an uncontrolled environment. It must be installed and operated with a minimum distance of 20 cm between the radiator and the user's body to ensure compliance with these limits. This is a critical safety consideration for installation.
FCC and IC Compliance: The device adheres to FCC Part 15 rules and Industry Canada's license-exempt RSSs. This ensures that the device meets regulatory standards for radio frequency devices. Users are warned that unauthorized changes or modifications could void their authority to operate the device.
Automatic Transmission Discontinuation: The device is designed to automatically discontinue transmission in the absence of information to transmit or in case of operational failure. This feature is not intended to prohibit control, signaling, or repetitive code transmissions where necessary.
Recycling: The manual emphasizes the importance of proper disposal and recycling of the product in accordance with local laws and regulations, directing users to www.amazon.com/devicesupport for recycling information. This highlights environmental responsibility as a key aspect of device ownership.

In summary, the P3A7EN is a comprehensive indoor air quality monitor with robust connectivity options, designed for continuous operation within specified environmental conditions, and backed by strong regulatory compliance and safety guidelines.

Amazon P3A7EN Specifications

General

Brand	Amazon
Model	P3A7EN
Category	Measuring Instruments
Language	English

Related product manuals

Amazon Hygrothermograph

2 pages