EN
10
5.3 Setting the master code
NOTICE
Should you forget your passcode, the safe can still be accessed with the
master code.
1. With the door open, press 0 key twice and then press the reset button (A).
A
13
2. Input the new code (3-8 digits), then press # key to conrm. The icon turns on. The
master code is set.
NOTICE
If the icon doesn’t turn on, the safe failed to set the new master code.
Repeat the steps above until successful.
14
6. Automatic Lockout
» The safe will enter a 30-second lockout if the wrong passcode is entered
3 consecutive times.
» After the 30-second lockout it will automatically unlock.
NOTICE
Entering the wrong passcode 3 more times will lock the safe for
5 minutes.
To Next Page
Loading...
