EN
8
4. Securing to a Floor or Wall
NOTICE
» Select a stable, dry and secure location for your safe.
» If bolting to a wall, make sure that your sale is resting on a supporting surface
(such as the oor or a shelf). Do not bolt your safe to both the oor and wall.
1. Place the safe on the selected location. Use a pencil to mark the mounting holes on
the oor or wall.
2. Move the safe and drill 2-inch-deep mounting holes (~50 mm) using a 12 mm drill
bit.
3. Move the safe back in place, align the mounting holes to the openings in the safe.
Insert the expansion bolts (G) through the holes and into the mounting holes and
tighten them securely.
G
10
To Next Page
Loading...
Need help?
General
