8
Setup
Step 4:
Setting the Password
With the door open, press the Reset button . The safe will emit two beeps.
Choose a new password (3-8 digits), punch it on the keypad and press the # key to confirm.
If the
icon turns on, the new password is successfully set.
If the
icon flashes, the safe failed to set the new password. Repeat the steps above until
successful. NOTE: Test the new password with the door open before locking the door.
B01BGY010C-AmazonBasics-IM-V03 (Multi).indb 8 9/8/16 3:49 PM
To Next Page
Loading...
