9
ENGLISH
English Français
Operation
LED Status
Indicators:
Bin full / Door open / Overload /
Overheat / Power On
•Power On: The Green LED light indicates the shredder is “On” and ready to operate when
paper is inserted.
•Overheat: The Red LED light indicates the shredder has shred continuously beyond the
maximum running time and overheating, the unit will automatically shut off. If this happens,
switch the shredder Off for 45 minutes or longer before resuming normal operation.
•Overload: The Red LED light indicates when too much paper is inserted. Use the "Reverse"
mode to back up and reduce number of sheets.
•Door Open: The Red LED light indicates the shredder basket is not pushed in properly.
Shredders with pull-out wastebaskets feature a safety power cut off upon bin removal. Make
sure the pull-out wastebasket is properly set back into place and the green “Power On” indica-
tor is lit.
•Bin Full: When the "Basket is Full", the RED light will indicate it needs to be emptied. While
lit, the shredder will be inoperable until the wastebasket is cleared.
To Next Page
Loading...
Need help?
General
