10
Setup Instructions
Playing music through the AUX input jack
Slide the switch on the back of speaker to “on” position. Short press the “O”
power button to switch from Bluetooth to AUX mode. The LED indicator will
turn green. Plug one end of a 3.5mm stereo cable (not included) into the AUX
input jack on the back on the speaker. Plug the other end of the cable into
a music player such as MP3, PC, CD player, mobile phone, etc. Turn music
player on. Adjust speaker volume with the + plus button and – minus button.
Using Speakerphone
Calls can be answered, ended and rejected when a phone is connected to
the speaker using the buttons on the top panel.
(back view)
charging LED indicator
power switch
AUX input jack
Answer » short press phone button
End » short press phone button
Reject » press twice phone button
Increase » long press + plus button
Decrease » long press – minus button
INCOMING CALL
CALL VOLUME
To Next Page
Loading...
Need help?
General
