Amazone AMATRON 3 User Manual

11.16.2.2 Starting the calibration
REQUIREMENTS
Reference point is set
1. Drive with the vehicle to the real reference point.
2. Mark the reference point in the list.
3. select .
The calibration is started. The virtual reference
point is moved to the vehicle position.
CMS-I-001551
11.16.3
Correcting the GPS drift manually
1. GPS switch >
The GPS switch calibration will be opened
CMS-I-002157
CMS-T-003535-A.1
CMS-T-003530-B.1
11 | Using the GPS switch
Calibrating the GPS switch
MG5560-EN-II | E.1 | 21.04.2020
128

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English