Amazone AMATRON II-A User Manual

30
Operating sequence fertiliser spreader ZA-M
AMATRON II-A DB 599 09.01
as indication about the residual amount(kg) inside
the hopper (Fig. 29/4).
• By pressing key
T3
(Bin) indications for filling
or emptying the spreader can be made (please
refer to para. 6.3.4).
• By pressing key
T4
(Next) (Fig. X1) you will
return to the actual operational display.
6.3.4 Menu "filling the hopper"
Fig. 30
The computer shows the actual filling level (Fig.
30/1) in the hopper.
If a smaller amount of fertiliser is filled in the value
can be changed here via the ten digit key board.
When filling the broadcaster completely press key
T2
(Bin full). The content figure is taken from the
earlier entering (please refer to para. 6.2.4). The
following display appears:
Fig. 31
• By pressing key
T4
(Next) return to the ac-
tual operational display.
When emptying the hopper press key
T1
(hop-
per empty):
Fig. 32
• By pressing key
T4
(Next) return to the ac-
tual operational display.
6.3.5 Menu "termination the job"
Fig. 33
This display inquires information whether the actual
job should be terminated and stored (e.g. when
changing to another field, etc.).
• By pressing key
T2
(no) the actual opera-
tional display appears (please refer to Display
para. 6.3.2 / Fig. 29).
• By pressing key
T3
(yes) the job is termi-
nated and stored. Then the display jumps to the
display for the next job (please refer to Display
para. 6.1.1)

Amazone AMATRON II-A Specifications

General

Brand	Amazone
Model	AMATRON II-A
Category	Desktop
Language	English