Amazone AMATRON II-A User Manual

Operating sequence field sprayer
47
AMATRON II-A DB 599 09.01
7.4.2 Display of the determined values
Fig. 86
The memory shows the travelled distance in km
(Fig. 86/1), the worked area in ha (Fig. 86/2) and
the sprayed amount of plant protective agent or
liquid fertiliser in litres (Fig. 86/3).
• By pressing key
T4
(Next) you will receive
information about operational hours (see para.
7.4.3).
7.4.3 Display of operational hours
Fig. 87
Here the working hours of the operator (Fig. 87/1)
and the operational hours of the implement (Fig.
87/2) are shown.
The operational hours (line 2) are counted when
the implement is in operational position, the opera-
tional hours of the vehicle (line 3), are counted
when it moves faster than 1 km/h and the opera-
tor’s working hours (line 4) are registered when the
on board computer is started.
• By pressing key
T4
(Next) the entered com-
ment for the relevant job can be read out (see
the following para.. 7.4.4).
7.4.4 Read out the comment
Fig. 88
If a comment (Fig. 88/1) had been entered in data
block "job" (para. 7.1.3) it has also been stored and
can be read out.
• By pressing key
T4
(Next) you will get into
the memory space display of the previous job
(please compare display para. 7.4.5).
7.4.5 Menu "next memory"’
Fig. 89
Reading out the other covered memories is done
as described in the previos chapters (7.4.1 ff).
7.4.6 Delete memory
If you select in the display for the memory space
(compare 7.4.1) key
T2
(Delete), the following
display appears:
Fig. 90
After reading out all data memory spaces the entire
memory can be deleted.

Amazone AMATRON II-A Specifications

General

Brand	Amazone
Model	AMATRON II-A
Category	Desktop
Language	English