Amazone AMATRON II-A User Manual

Operating sequence field sprayer
49
AMATRON II-A DB 599 09.01
7.5 Function key and their use
during the spraying operation
During the spraying operation the operational dis-
play appears on which the current forward speed in
km/h and the actual spread rate in kg/ha are shown
(please compare para. 7.3.2 / Fig. X).
The function keys (on the right hand side of the ten
digit key board) allow further inquiries or inputs
during the spraying operation.
7.5.1 Pocket calculator function
The pocket calculator is started by pressing one of
the four calculating keys
-
+
-
*
.
.
WX OP
GH
Fig. 91
The figures are entered via the ten digit key board
and for the result press key
=
Eingabe
Input
.
By pressing key
T4
(Back) you will return to the
previously selected display.
7.5.2 Key: Worked part or total area
By pressing key
kg; l
ha
the so far sprayed quantity
(Fig. 92/1) and the worked area (Fig. 92/2) of the
actual job are displayed.
Fig. 92
• Press key
T2
(Total) tol receive information
about the total sprayed quantity (Fig. 93/1) and
the worked area (Fig. 93/2) since the last de-
leting procedure.
Fig. 93
• Press key
T1
(Delete) to delete the indica-
tion.
• Press key
T3
(Delete) to delete the indica-
tion.
• Press key
T4
(Next) of the relevant display to
return to the actual operational display.
7.5.3 Key: Forward speed and opera-
tional times
Via key
km
h
all so far registered data for the ac-
tual job are recalled. The travelled distance in km
(Fig. 94/1) and the operational hours (Fig. 94/2) for
implement, vehicle and operator are shown.
Fig. 94
• Press key
T4
(Next) to return to the actual
operational display.
Via the key
ha/h
1/min
the present (Fig. 95/1) and the
average (Fig. 95/2) area efficiency are displayed.

Amazone AMATRON II-A Specifications

General

Brand	Amazone
Model	AMATRON II-A
Category	Desktop
Language	English