Amazone AMATRON II-A User Manual

Malfunctions
57
AMATRON II-A DB 599 09.01
- Then properly affix the setting motor with the un-
hooked setting spindle again in the motor retainer.
- Install the clamping device (Fig. 107/1) for the me-
tering shutter lever (Fig. 107/2) as follows:
- Remove thumb nut (Fig. 107/3).
- Remove the pins and exchange (Fig. 108) the
position of the two washers (Fig. 107/4) from
the rear (Fig. 107/5) to the front.
Fig. 106
Fig. 107
Fig. 108
I
Secure the unhooked settng spindle
(Fig. 106/1) with fixing aids from swi-
velling into the operational range of
the hydraulic ram.
6
1
2
4,5
6
3
1

Amazone AMATRON II-A Specifications

General

Brand	Amazone
Model	AMATRON II-A
Category	Desktop
Language	English