8
Information about the computer
AMATRON II-A DB 599 09.01
1.6 Designated use of the on board
computer
AMATRON II-A has exclusively been designed for
the usual operation in agriculture as a display-,
monitoring and governing device in combination
with the AMAZONE fertiliser spreaders and the
AMAZONE and BBG field sprayers.
Any use other than that stipulated above is no
longer regarded as designated use. The manufac-
turer does not accept any responsibility for damage
resulting from this. Therefore, the operator himself
will carry the full risk.
Under "designated use" the operator must adhere
to the manufacturer’s prescribed operation, main-
tenance and repair conditions and exclusively use
original AMAZONE spare parts.
All applicable accident prevention advice as well as
any further generally accepted safety-, working-,
medical- and road traffic rules should be adhered
to.
AMAZONE machines have been manufactured
with great care, however, certain deviations from
the application rate cannot totally be excluded.
These deviations may be caused, e.g. by:
- Drifting.
- Blockage (e.g. by foreign particles, damp fertil-
iser, bag residue, deposits etc.)
- Undulated terrain.
- Wear of wearing parts.
- Damage by external influence.
- Wrong drive R.P.M. and forward speed.
- Wrong setting of the machine (incorrect mount-
ing, not adhering to the setting chart).
- Fitting wrong spreading discs (e.g. mixing them
up).
Before every operation and also during the opera-
tion check your machine for proper function and for
sufficient application accuracy.
Claims regarding damage not having ocurred on
the AMATRON II-A itself will be rejected. This also
applies to damage due to application errors when
fertilising or spraying. Arbitrary modifications to the
AMATRON II-A may result in damage and there-
fore, the manufacturer does not accept liability for
such damage.
2. Safety
This instruction manual contains basic advice which
must be adhered to when mounting, operating and
maintaining the machine. Ensure that this instruction
manual has been read by the user/operator before
starting to operate the device and that it is made
readly available at all times to the user.
Please strictly observe and adhere to all safety ad-
vice given in this instruction manual.
2.1 Dangers when not adhering to the
safety advice
Not adhering to the safety advice given
• may result in endangering the user or other per-
sons, the enfironment and/or the machine itself.
• may result in the loss of any claim for damage.
Not paying attention to the safety advice may cause
the following risks:
• Danger for persons by not secured operational
range.
• Failure of important functions of the machine.
• Failure of prescribed measures for maintenance
and repair.
• Danger for persons by mechanical or chemical
affects.
• Danger to persons or to the environment by leaking
hydraulic oil.
2.2 Qualification of operator
The implement may only be operated, maintained and
repaired by persons, who are acquainted with it and
have been informed of the relevant dangers.
2.3 Symbols in this instruction man-
ual
2.3.1 General danger symbol
Not adhering to the safety advice in this instruction
manual may cause danger to health and life of per-
sons. They are identified by the general danger sym-
bol (Safety symbol according to DIN 4844-W9)
a
2.3.2 Attention symbol
To Next Page
Loading...
Need help?
General
