Amazone Catros 3001 User Manual

Operator’s Manual
AMAZONE
Catros 3001
Catros 3501
Catros 4001
Catros
+
3001
Catros
+
3501
Catros
+
4001
Catros 4002-2
Catros 5002
-2
Catros
6002-2
Catros
+
4002-2
Catros
+
5002-2
Ca
tros
+
6002-2
Compact Disk Harrow
MG4780
BAG0053.14
10.17
Printed in Germany
Please read, understand and
fol
low this operator’s manual
before operation.
Keep it in a safe place for
future use.
en-US

Amazone Catros 3001 Specifications

General

Brand	Amazone
Model	Catros 3001
Category	Tiller
Language	English

Summary

General Safety Instructions

Obligations and liability

Description of safety symbols

Explains the meaning of various safety symbols used in the manual.

Personal safety

Information on necessary personal protective equipment for operators.

Safety and protective equipment

Guidance on ensuring safety and protective equipment is functional.

User training

Safety measures in operation

Procedures to ensure safe operation of the implement.

Constructive modifications

Warning labels and safety markings on the implement

Safety information for users

Implement transportation

Product description

Danger area and danger points

Technical data

Base weight

Necessary tractor requirements

Specifies tractor engine power, electrical, and hydraulic system requirements.

Commissioning

Checking the suitability of the tractor

Ensures the tractor meets requirements for safe implement operation.

Calculating the total tractor weight, axle loads, load capacities and minimum ballast

Guides on calculating tractor weight distribution and ballast requirements.

Securing the tractor / implement against unintentional start-up and rolling

Procedures to prevent unintended movement during maintenance or adjustments.

Connecting and disconnecting the implement

Connecting the implement via Quick Hitch

Step-by-step guide for attaching the implement using a Quick Hitch.

Disconnecting the implement

Instructions for safely detaching the implement from the tractor.

Adjustments

Setting the working depth

Offset disk rows

Transportation

Converting from operational to transport position

Steps to convert the implement from working to transport mode.

Use of the Implement

Converting from transport to operational position

Procedure to switch the implement from transport to operational mode.

Use in the field

Faults

Uneven working depths across the working width

Cleaning, maintenance and repairs

Cleaning

General procedures and precautions for cleaning the implement.

Lubrication specifications

Service plan – overview

Scheduled maintenance tasks and intervals for the implement.

Replacing the discs (Workshop work)

Hydraulic system

Information and safety precautions for working with the hydraulic system.

Bolt tightening torques