Putting to operation
102
Cirrus 3/4/6000 DB2034 08.04
7.2.1 Folding the machine wings down and in
Danger!
Advise people to leave the opera-
tional range of the machine wings
before folding the machine wings
down and in.
Fig. 156
Important!
Before folding the machine wings
down and in align tractor and the
machine on level ground.
Fully lift the machine before folding
the machine wings down or in. Only
with the entirely raised machine the
operational tools will have sufficient
ground clearance and are thus
protected from damage.
Fig. 157
7.2.1.1 Folding down the machine wings
Folding down the machine wings:
- Release the parking brake and remove your foot
from the brake pedal.
Never leave the tractor cab with the parking brake
released.
- Actuate control unit 2 until the machine has been
fully lifted (see Fig. 158).
Otherwise the operational tools will get damaged
during the folding procedure.
- Apply parking brake.
Fig. 158