Putting to operation
112
Cirrus 3/4/6000 DB2034 08.04
7.7 Locking the star wheel and actuating the STOP-key when the operation is stopped
Hint!
When the operation is stopped and the machine lifted lock the star wheel in
raised position (see below) and activate the STOP key (see operator's manual for
), so that the tramline counter stops counting.
When actuating the control unit 2 the machine, the track markers and the coulter
frame are lifted / lowered without the tramline counter continuing to count.
To lock the star wheel actuation
- recall the operation menu in .
- Press key (Fig. 180/1) until the symbol (Fig.
180/2) appears.
The star wheel actuation is locked when the symbol
(Fig. 180/2) is shown in the operation manual.
Fig. 180
7.8 Locking the track marker actuation
Hint!
When actuating the control unit 2 the machine, the star wheel, the track markers
and the coulter frame are lifted / lowered.
To lock the track marker actuation
- recall the operation menu in .
- Press key (Fig. 181/1) until the symbol (Fig.
181/2) appears.
The star wheel actuation is locked when the symbol
(Fig. 181/2) is shown in the operation menu.
Fig. 181