Malfunction
120
Cirrus 3/4/6000 DB2034 08.04
Danger!
Only create the emergency mode for folding in case of a failure of
!
In case of emergency mode
• immediately see the nearest specialised workshop!
• ensure before transport that the locking hooks (Fig. 166) properly lock the
machine wings!
• only actuate the hydraulic control spool valves within the tractor cab. hydr.
• before actuating the hydraulic control spool valves, advise people to leave
the danger area.
8.4 Deviations between the adjusted and the actual seed rate
For the adjustment of seed rate, the accumulation of the worked area or an indication
of forward speed requires the impulses of the seed drill drive wheel
over a measured distance of 100 m.
Slip on the seed drill drive wheel may vary in changeable soils (e.g. from heavy to
light land) resulting in a change of the value of ‘Imp./100m’
In case of deviations between the adjusted and the actual seed rate, the calibration
figure "Imp./100m" should be re-determined by driving down a test distance.
Sowing moist dressed seeds may result in deviations between the adjusted and the
actually sown seed rate, when there is a period of less than one week (recommended
2 weeks) between dressing and sowing.
To Next Page
Loading...
Need help?
General
