Cleaning, maintenance and repairs
Citan 12001-C/15001-C BAH0094-3 12.2019 199
12 Cleaning, maintenance and repairs
WARNING
Danger of crushing, shearing, cutting, being caught or drawn in,
winding and knocks through:
ï‚· unintentional falling of the implement raised using the trac-
tor's three-point hydraulic system.
ï‚· unintentional lowering of raised, unsecured implement
parts.
ï‚· Unintentional start-up and rolling of the tractor-implement
combination.
Secure the tractor and implement against unintentional starting and
unintentional rolling away before you perform any cleaning, servicing
or maintenance work on the implement. See page 97.
WARNING
Risk of crushing, shearing, cutting, being caught and/or drawn
in, or impact through unprotected danger points.
ï‚· Mount protective equipment, which you removed when cleaning,
maintaining and repairing the implement.
ï‚· Replace defective protective equipment with new equipment.
Danger
Carry out cleaning, maintenance or repair work (unless other-
wise specified) only after the following conditions are fulfilled:
ï‚· The implement sections are unfolded
(see section 10.1, page 173)
ï‚· The rear frame is fully lowered.
ï‚· The tractor parking brake is applied.
ï‚· The tractor PTO shaft is shut off.
ï‚· The tractor engine is switched off.
ï‚· The ignition key is removed.