Amcor PLVM 16000E - Page 7

Fan mode
－ Press “ MODE” to select fan mode, fan mode indicator turns on .
－ Press “SPEED” to select fan speed(Auto，high ,medium and low)
－ Temperature and sleeping function cannot be setup.
Dehumidifying mode
－ Press “MODE” to select dehumidifying mode, dehumidifying mode indicator turns on .
－ Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
Timer mode
－ Under standby mode, press “TIMER” to setup the power-on time. Timer indicator turns on.
－ Under power-on mode, press “TIMER” to setup power-off timer. Timer indicator turns on.
－ under power-on or standby mode, press this key to setup on/off time from 1~24.
Sleeping mode
－ Press key “SLEEP” enter into sleeping mode, default value of fan speed is low.
－ When sleeping mode turns on , under cooling mode, the first one hour later, setting
temperature will go up 1℃, the second one hour later, setting temperature will go up
another 1℃, and then keep the same .
－ Sleeping mode is invalid under dehumidifying and fan mode. Under water full,
machine standby and mode conversion, sleeping mode will be cancelled .
Compressor protection
－ Three minutes later after power on / restart, compressor starts to run.
6