Need help?Do you have a question about the Amek 51 Media and is the answer not in the manual?
General| Type | Music Mixer |
|---|---|
| Channels | Up to 72 |
| Inputs | Each channel has a mic input and a line input |
| Outputs | Main stereo outputs, group outputs, aux sends |
| Aux Sends | 6 |
| Group Buses | 8 |
| Stereo Returns | 4 |
| Phantom Power | Yes, switchable on each channel |
Details system features like Auxiliary Send Busses, Stereo AFL, In-Place Solo, and multi-format monitoring.
Comprehensive monitoring provided by the M3 Monitor module.
AMEK's proprietary mixing automation software for fader levels and switch automation.
AMEK's proprietary system providing 11 software gain control devices per channel.
Details 1/4" jacksockets for inputs, stereo FX Return and Group inputs.
Stereo signals sent post-pan control to Multitrack Busses.
Details Gain (Stereo Gain) control.
Eight auxiliary sends fitted, arranged in two groups of four pots.
Feeds signal to stereo mix and multitrack busses with -5dB centre attenuation.
Provides additional control to each channel VCA via automation system.
Avoids using pairs of Mono Modules for stereo material.
Features a 4-Band semi-parametric EQ with Swept Mids and switched HF/LF bands.
Controls VCA via mix computer under Supertrue automation.
Provides essential features for multitrack recording and mixing.
Describes the simplified stereo group path.
Describes the simplified stereo FX return path.
Details Inputs, Signal Routing, Groups to Tracks, Auxiliary Sends, FX Return Inputs/Outputs, Stereo Group/Line Inputs, Equaliser.
Controlled by 100mm travel fader via mix computer.
Functions not available for the M2 FX Return/Group Module.
Offers comprehensive monitoring for Stereo, LCR, LCRS, 5.1 and 7.1 modes.
Provides flexible monitoring with Speaker Solo and Input Cut.
Submixing system for wide-format monitor source signals.
Simplified diagrams showing signal flow paths and inter-relationships.
Uses a logic controlled matrix for input/output selection and functions.
Features Main Level knob for VCAs and Mute & Dim switches.
Controls Nearfield speakers with VCAs and short travel switches.
Console defaults to Multitrack/Stereo mode with specific speaker mutes.
Two banks of five switches select Stereo and 5.1 sources.
Five stereo sources: ST 1-3, Lt Rt, Stereo Buss.
Five 8-wide monitor sources: EXT 1-4, DIR/PB.
Selects LCRS, 5.1 or 7.1 switches for format selection.
Activates Near Field monitors via NF switch in FORMAT/SPK MUTE mode.
Used to downmix from wide format to smaller format.
Controls Main Stereo or Main 5.1 outputs.
Selects talk destination: Studio, Aux 1&2/5&6, Slate.
Switches for Studio Level control: FADER>ST, FADER>WIDE, Insert.
Four mode switches control monitor response in surround mode.
Primary mode for controlling Formats, Filter, Nearfield monitors, and speaker mutes.
In other modes, functions affect all monitor inputs or speaker outputs.
Powerful, easy-to-use automation system with continuous development.
Latest version with new features and improved interface.
On-Line and Off-Line editing system for manipulating Mix Data.
Eleven available software devices for gain control.
Optional Mix Output Fader panel (M6A) with Automated Motorised Joystick.
Joystick operates as 8-Way Panner or two tracking 4-Way Panners (A & B).
To Next Page