1
H-Burner Use and Care Instructions
(AFG-INST-009_REVH_02/19)
A flame dancing and glistening on fire glass in a warm fireplace is truly a sight
to behold, but to get the most appealing look from this display, you need a
high-quality H-burner.
An H-burner ensures that the flames in your fireplace (or firepit) are realistic,
and evenly distributed.
American Fire Glass' H-burners are made of high grade stainless steel which
ensures their durability under extreme heat and severe weather conditions.
American Fire Glass™ H-Burners can be used both outdoors and indoors. The H-burner works best under 2 - 4 inches
of fire glass.
Our H-burners are designed to be used with natural gas and are available in six sizes. You must choose the size that
best fits the internal dimensions of your fireplace or fire pit. See page 6 for size chart.
ATTENTION! READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY OR USE
Tools Required
Adjustable Wrench, Pipe Wrench, Pipe Sealing Compound, and Hand-Held Lighter.
BURNER SYSTEMS:
SS-H-12: MATCH LIGHT (12” H-Burner Style)
SS-H-18: MATCH LIGHT (18” H-Burner Style)
SS-H-24: MATCH LIGHT (24” H-Burner Style)
SS-H-30: MATCH LIGHT (30” H-Burner Style)
SS-H-36: MATCH LIGHT (36” H-Burner Style)
SS-H-48: MATCH LIGHT (48” H-Burner Style)
All Burners for Natural Gas Only
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result, causing
property damage, personal injury, or loss of life.
Installation and service must be performed by a gas installation professional, service agency, or gas supplier.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain manual for future reference and safety precautions.
To Next Page
Need help?
General
