Need help?Do you have a question about the American Innovations Allegro QX 7.0 and is the answer not in the manual?
General| Brand | American Innovations |
|---|---|
| Model | Allegro QX 7.0 |
| Category | Desktop |
| Language | English |
Lists items included with the Allegro QX package.
Tasks to prepare the device for service after receiving it.
Steps to install software for computer communication.
Instructions to move necessary files to the PCS executable directory.
Description of the device's components like DVM, display, keypad.
Introduction to the factory-installed applications on the Allegro QX.
Guidance on using touchscreen, keypad, and icons for device navigation.
Information on accessing PDF manuals and software release notes.
Contact details for assistance with Al software or Allegro QX.
Instructions for connecting test leads to the DVM input and COM jacks.
Steps to set test function, voltage range, and sample rate for measurements.
Configuration of On/Off, GPS, Amps Mode, and Data Logger tabs for test functions.
How to view the interruption cycle as a waveform graph in real-time.
Accessing and understanding the data logged by the device.
Connecting test leads and data canes for close interval surveys.
Steps to create, open, and configure a survey file for data collection.
Configuring Survey, Type, Modes, On/Off, and GPS tabs for a survey.
Entering required survey details like Segment, Pipe, Tech, Run, and Date.
Determining whether the survey is AC or DC.
Setting survey mode to Flagged or Fixed Increment.
Configuring distance, direction, and timed readings for flagged surveys.
Configuring distance, direction, and wire counter usage for fixed increment surveys.
Defining survey type, on/off times, and delay times for interrupted surveys.
Setting up GPS properties for recording location and time stamps.
How to capture readings using data canes or wire counters.
Adding contextual information to survey records directly or from a list.
Adding specific data points to a survey record.
Saving survey data to the device's storage.
Reviewing recorded survey data in list or single record view.
Exporting survey data in formats like DBF or CSV for external analysis.
Moving survey data from Allegro QX to PCS software.
Connecting data canes to the DVM for DCVG data collection.
Configuring Misc, File, GPS, and Colors tabs for DCVG surveys.
Setting beep options, overwrite warnings, and double-click detection.
Enabling autosave and setting save intervals for survey files.
Setting GPS display format and handling of unavailable GPS signals.
Customizing display colors for different data values.
Steps to create, open, and configure a DCVG survey file.
Configuring Survey, Modes, On/Off, DCVG, and GPS tabs for the survey.
Defining survey details like ROW Code, Pipeline Code, and Surveyor.
Selecting the survey mode as Flagged or Fixed Increment.
Configuring flagged survey parameters like distance and direction.
Configuring fixed increment survey parameters like distance.
Setting survey type, on/off times, and delay times for interrupted surveys.
Setting P/S values, half-cell calibration, and polarity display.
Capturing readings via data cane or wire counter.
Adding text notes to survey records.
Recording details about pipeline coating defect indications.
Adding specific data points to a survey record.
Saving the collected DCVG data.
Reviewing recorded DCVG data.
Exporting DCVG survey data to other applications.
Connecting test leads for facility inspection readings.
Transferring survey files from PCS to the Allegro QX.
Opening and setting up a survey file for periodic surveys.
Configuring On/Off, GPS, RFID, Fonts, and Misc tabs for periodic surveys.
Defining survey type and on/off time settings.
Setting GPS display format and options for periodic surveys.
Configuring COM port and baud rate for attached RFID devices.
Customizing font type, size, and display for survey items.
Enabling auto-backup and setting backup intervals.
Configuring GPS settings for a second GPS receiver.
Rearranging, adding, or deleting sites within a survey file.
Changing the order of sites or hiding surveyed sites.
Adding new facilities or locations to the survey file.
Removing sites from the survey file.
Reviewing readings or taking new ones for a survey record.
Finding specific records by paging, searching, or jumping to a site.
Manually entering readings or capturing them from devices.
Selecting multiple values from a picklist for a field.
Capturing readings for inspection fields.
Taking readings over a specified duration.
Taking and managing pictures for facility inspection records.
Adding new pictures via the camera to an image field.
Viewing, adding, deleting, and arranging attached images.
Reordering images for fields, preserving order in PCS.
Designating an image as the primary representation for a record in PCS.
Viewing images and modifying their descriptions.
Removing images from a record's image field.
Saving changes made to the periodic survey file.
Transferring survey files to a computer or PCS.
Describes High/Low, GPS Sync, and GPS Real Time cycle types.
Provides recommended on/off settings for various interruption survey types.
Locating the software version number on the Allegro QX title bar.
Contacting Technical Services for software updates and access.
Information about internal memory card and USB flash drive support.
Using photos from the Allegro QX camera in PCS for records.
Step-by-step guide for DVM removal and reinstallation.
Troubleshooting steps for power-related issues on the Allegro QX.
Explanation of Suspend Mode and Power Off options for battery conservation.
Steps for resetting the device and conserving battery life.
Adjusting text size, backlight brightness, contrast, and text font.
Viewing GPS data, enabling options, and changing COM port/baud rate settings.
Utility to change the default datum for u-blox compatible GPS receivers.
Setting up GPS applications for external Bluetooth GPS devices.
Configuring GPS Controller and Status for Bluetooth communication.
Lists global, AiDVM, DCVG, CECI, and Periodic Survey shortcuts.
To Next Page