© 2016-2018 American Innovations, Ltd.
The following procedures are general steps for a typical installation. For specific instructions, see the MicroMax
Interrupters User Guide (part no. 122204-000) available from your website account under the Help menu.
Installing the Equipment
Required Tools
Voltmeter
Windows
®
Laptop PC
Bullhorn
®
Tools configuration software
USB to mini-USB cable
Optional Tools
(Continued)
MicroMax GPS350
Installation and Configuration
Part No. 122207-000, Rev. 1
1 of 4
Derating Table
Ambient Temperature Interruption Cycle
Celsius Fahrenheit
0.8 s ON - 0.2 s OFF 4 s ON - 1 s OFF
25 ⁰C
35 ⁰C
45 ⁰C
55 ⁰C
65 ⁰C 149 ⁰F
95 ⁰F
113 ⁰F
131 ⁰F
77 ⁰F
60 A
60 A
58 A
49 A
38 A 51 A
66 A
78 A
80 A
80 A
CAUTION: Metal relay casing on the MicroMax GPS350 will get hot. Allow 5 - 10 minutes after interruption
stops before handling the unit.
CAUTION: Do not connect the MicroMax GPS350 to primary mains power.
WARNING: Before beginning any wiring to the MicroMax GPS350, ensure that power has been turned off at
the rectifier.
GPS350 Installation & Configuration
Quick Reference Guide
Installation and Configuration
To Next Page
Need help?
General
