American Leather V8 COMFORT SLEEPER

Need help?

Do you have a question about the American Leather V8 COMFORT SLEEPER and is the answer not in the manual?

Summary

Disassembly Procedures

Tools and Sofa Positioning

Details required tools and the initial step of tilting the sofa forward onto its front arms.

Sleeper Type and Dust Cover Handling

Distinguishes High Leg and Low Leg sleepers and describes dust cover removal for low leg models.

Arm and Support Panel Removal

Arm Bolt Removal (High Leg)

Remove bolt that locks arm to the frame on the back with 'Ear' for high leg models.

Bottom Support Panel Removal (High Leg)

Remove the bottom support panel for high leg sleepers.

Spring Removal

Remove the two springs from the sofa mechanism.

Back to Arm Release

Place a block under the back near the arm and press down to release the back from the arm.

Back Section Disassembly

Back Removal (High Leg)

Remove the back with 'EAR' by lifting it up and away.

Back Bolt Removal (Low Leg)

For backs without 'EAR', remove the inside back bolts as shown.

Mattress and Mechanism Separation

Return Sofa to Legs and Remove Bolts

Return the sofa back onto its legs and remove two bolts from each side of the middle mattress section.

Lift Mattress Assembly

Lift the middle and front mattress assembly away from the sofa and fold it on the floor.

Bed Section and Support Tube Removal

Back Bed Section Removal

Lift the back bed section up and out of the sofa.

Back Support Tube Removal

Remove 4 bolts from the back bed section on each side and remove the back support tube.

Square Back Tube Removal

Remove the square back tube with a 7/16" socket and wrench.

Camel Hump Rail Removal

Camel Hump Rail Bolt Removal

Remove 2 bolts from each side of the Camel Hump Rail.

Resassembly Procedures

Camel Hump Rail Installation

Install 2 bolts on each side of the Camel Hump Rail.

Square Back Tube Installation

Install the square back tube with 7/16" socket and wrench; tube mounts on top of bracket.

Back Support Tube Installation

Install 4 bolts on each side; back support tube attached using the 2nd hole from the bottom.

Back Bed Section Installation

Install the back bed section onto the mechanism.

Mattress Assembly and Back Attachment

Mechanism and Mattress Assembly Placement

Open the mechanism and place the middle and front mattress assembly onto the mechanism brackets.

Mattress Assembly to Bracket Bolting

Install 2 bolts through the bracket on each side to secure the mattress assembly.

Back Installation with Hook and Peg

Install the back with 'EAR' by lining up the hook and peg.

Seat Back Hook and Peg

Press in and down to seat the hook and peg securely.

Final Sofa Assembly Steps

Sofa Body Forward Rolling

Roll the sofa body forward onto its front arms.

Spring Installation

Install a spring on each side of the sofa frame.

Bottom Support Panel Installation (High Leg)

Install the bottom support panel for high leg models.

Back to Arm Attachment

Install bolt(s) on each side to attach the back to the arms.

Final Test

Assembled Sleeper Testing

Roll the assembled sleeper to the upright position and test by closing and opening it.

The Comfort Sleeper (Ver.8) is a sophisticated piece of furniture designed for both seating and sleeping, offering a versatile solution for modern living spaces. Its primary function is to transform seamlessly from a sofa into a bed, providing comfort and convenience. The design emphasizes ease of use, allowing for quick and efficient conversion between its two main modes.

Function Description

The Comfort Sleeper operates as a dual-purpose furniture item: a sofa for daytime use and a bed for nighttime accommodation. The core of its functionality lies in its innovative disassembly and reassembly mechanism, which allows for the unit to be broken down into smaller, manageable components for transport, moving, or storage, and then reassembled with relative ease. This feature is particularly beneficial for navigating tight doorways, stairwells, or when relocating.

When functioning as a sofa, the Comfort Sleeper provides a comfortable seating experience, typical of high-quality upholstered furniture. It features arms, a back, and a seat cushion, all designed for ergonomic support and aesthetic appeal. The upholstery is chosen for durability and comfort, contributing to its overall quality.

The transformation into a bed involves a multi-step process that reveals a mattress assembly. This assembly is designed to provide a supportive and comfortable sleeping surface, comparable to a traditional bed. The mechanism is engineered to be robust, ensuring stability and longevity even with frequent use. The bed component typically includes a mattress that folds or articulates to fit within the sofa frame when not in use.

The disassembly and reassembly process is a key functional aspect, allowing for modularity. This involves detaching the arms, back, and various bed frame components. The design ensures that each component is secured with bolts, springs, and interlocking mechanisms, which are then reversed during reassembly. This modularity not only aids in transport but also simplifies potential repairs or component replacements, as individual parts can be accessed and serviced more easily.

Usage Features

The Comfort Sleeper is designed with several usage features that enhance its practicality and user experience.

Ease of Transformation: The mechanism for converting the sofa into a bed is engineered for smooth operation. While it involves multiple steps, the design aims to make the process as intuitive as possible. Users can open the bed by pulling out the mattress assembly, and close it by pushing the assembly back into the sofa frame. The process is typically designed to be manageable by one or two people, depending on the specific step.
Modular Design for Transport: A significant usage feature is its ability to be disassembled into smaller components. This is invaluable for maneuvering the sleeper through narrow hallways, doorways, or up flights of stairs, which are common challenges with traditional, rigid sofa beds. The arms, back, and bed frame components can be detached, reducing the overall size and weight of individual pieces. This modularity makes the Comfort Sleeper a practical choice for apartments, older homes, or any space with limited access.
High Leg and Low Leg Options: The sleeper may come in different configurations, such as "High Leg" and "Low Leg" versions. These variations can impact certain disassembly/reassembly steps, such as the presence or absence of an "ear" on the arm or a bottom support panel. This customization allows the sleeper to fit different aesthetic preferences and functional requirements.
Secure Fastening System: The components are secured using a combination of bolts, sockets, wrenches, and springs. This robust fastening system ensures that the sleeper is stable and safe in both sofa and bed configurations. The use of standard tools for assembly and disassembly means that users can perform these operations without specialized equipment.
Dust Cover (Low Leg Sleepers): For low leg sleepers, a dust cover is integrated, typically secured with Velcro. This cover helps protect the internal mechanisms and mattress from dust and debris when the bed is not in use, contributing to the longevity and cleanliness of the unit.
Spring-Assisted Mechanism: The bed mechanism often incorporates springs, which assist in the opening and closing of the bed. These springs help counterbalance the weight of the mattress and frame, making the transformation process less strenuous for the user.
Comfortable Sleeping Surface: The mattress assembly is designed to provide a comfortable sleeping experience. Unlike some traditional sofa beds that use thin or uncomfortable mattresses, the Comfort Sleeper aims to offer a quality sleep surface that can be used regularly.
Arm Design Variations: The arms of the sleeper can vary, with some having an "ear" that extends over the arm, particularly on high leg sleepers. This design detail affects how the back is attached and detached, requiring specific steps during disassembly and reassembly.
Testing for Functionality: After reassembly, the sleeper is designed to be tested by rolling it to an upright position and then opening and closing the bed mechanism. This ensures that all components are correctly installed and functioning as intended, providing peace of mind to the user.

Maintenance Features

The design of the Comfort Sleeper incorporates several features that facilitate maintenance and ensure its long-term performance.

Accessible Components: The modular design, which allows for disassembly, also makes internal components more accessible for inspection, cleaning, or repair. For example, if a spring needs to be replaced or a bolt tightened, the relevant sections of the sleeper can be opened or detached to gain access.
Standard Fasteners: The use of common tools like sockets and wrenches for bolts and nuts simplifies maintenance. Users do not need proprietary tools to perform basic adjustments or repairs, making it easier to maintain the sleeper at home.
Dust Cover Protection: The dust cover on low leg sleepers serves as a maintenance feature by protecting the mattress and internal mechanisms from dust accumulation. This reduces the need for frequent deep cleaning of the bed components and helps preserve their condition.
Durable Construction: The sleeper is constructed with robust materials and engineering principles to withstand regular use. The frame components, mechanisms, and upholstery are chosen for their durability, minimizing the need for frequent maintenance or repairs.
Clear Disassembly/Reassembly Instructions: The availability of detailed instructions with visual aids (like the provided images) is a crucial maintenance feature. It empowers users to correctly disassemble and reassemble the unit, which is essential for proper care, moving, or troubleshooting. Incorrect assembly can lead to damage or reduced functionality, so clear guidance is vital.
Spring Replacement: The springs, being a critical part of the bed mechanism, are designed to be replaceable. Should a spring lose its tension or break, the modular design allows for its removal and replacement, extending the life of the sleeper.
Upholstery Care: While not explicitly detailed in the mechanism instructions, the upholstery is typically chosen for ease of cleaning and maintenance. Depending on the fabric, it may be spot-cleanable or require professional cleaning, contributing to the overall longevity and appearance of the sofa.
Regular Inspection Points: The instructions highlight various bolts and connections, implicitly suggesting these as points for regular inspection. Periodically checking these fasteners for tightness can prevent loosening over time, which could affect the stability and smooth operation of the sleeper.
Mechanism Lubrication (Implied): While not explicitly stated, mechanisms with moving parts often benefit from periodic lubrication. The accessibility provided by the disassembly process would allow for such maintenance if recommended by the manufacturer, ensuring the smooth operation of the bed transformation.

In summary, the Comfort Sleeper (Ver.8) is a highly functional and user-friendly piece of furniture that excels in its ability to transform from a comfortable sofa to a practical bed. Its modular design, ease of transformation, and thoughtful maintenance features make it a versatile and durable solution for diverse living environments.