American Marine PINPOINT User Manual (English)

Other manuals for American Marine PINPOINT

Need help?

Do you have a question about the American Marine PINPOINT and is the answer not in the manual?

General

Explains the controller's function for managing chillers/heaters and stresses the need for user attention and proper probe placement.

Details temperature measurement/control ranges, differential settings, and resolution in Fahrenheit.

Covers the 3 1/2 digit LCD display and two independent 12 Amp 110 VAC relay outputs.

Describes the main LCD screen for temperature/setpoints and the POWER/TEMP status LEDs.

Details the RANGE and CENTER VALUE potentiometers used for setting temperature parameters.

Explains the slide switch for display mode and the upper row LEDs indicating outlet status.

Details the function of Outlet #1 (high setpoint) and Outlet #2 (low setpoint) for connecting devices.

Stresses the critical need for the probe tip to be immersed in the system at all times for accurate readings.

Explains how incorrect probe position or low fluid levels can lead to inaccurate readings and continuous device operation.

Guides on using the Range and Center Value screws to establish desired temperature stability and target.

Provides specific instructions for connecting a chiller to Outlet #1 or a heater to Outlet #2 based on setpoints.

Details the 2-year warranty on material and workmanship, excluding costs for removal, installation, or damage.

Outlines requirements for warranty claims, including proof of purchase and freight prepaid shipment for defective products.