Need help?Do you have a question about the American Reliance LPS-305 and is the answer not in the manual?
General| Brand | American Reliance |
|---|---|
| Model | LPS-305 |
| Category | Power Supply |
| Language | English |
Provides a general description of the power supply, its performance specifications, options, and accessories.
Outlines critical safety precautions for operation, service, and repair, including grounding and fuse usage.
Details available options for the power supply, such as voltage input and interface.
Lists standard accessories included with the power supply, like cables and manuals.
Explains the isolation of the power supply's output from earth ground.
Presents detailed technical specifications for the LPS-305 power supply.
Instructions for checking, mounting, and connecting the power supply to AC power.
Guidance on inspecting the power supply for damage after unpacking.
Recommendations for optimal placement and ventilation for the power supply.
Details on the required AC power source voltage and frequency for operation.
Information on the location and type of the AC line fuse.
Describes the functions of front panel controls and output terminals for operation.
Explains the messages and indicators shown on the LCD display.
Identifies and describes the connectors and indicators on the rear panel.
Describes the power supply's state and display upon initial power-on.
Explains how to program and adjust output voltage and current settings.
Instructions on how to turn individual or all outputs on and off.
Details the overload protection mechanism for the 5V/3.3V outputs.
Explains the firmware limit on total current output to protect components.
Describes the function of the internal beeper and how to control it.
Explains how connecting the load between positive and negative terminals creates a higher voltage source.
Provides step-by-step instructions for calibrating the LPS-305 power supply.
Detailed instructions for safely inspecting and replacing the unit's fuse.
Troubleshooting steps and advice for resolving common operational problems.
Details the two-year limited warranty, coverage, non-warranty service, and returns.
Procedures for returning the instrument for service or calibration.
A list of commands available for controlling the power supply via RS-232.
Explains the syntax, parameters, and response format for RS-232 commands.
Provides a sample program using QBasic to control the power supply via RS-232.
To Next Page
