Need help?Do you have a question about the American Weigh AMW-13 and is the answer not in the manual?
General| Division | 0.1 oz / 1 g |
|---|---|
| Readability | 0.1 oz / 1 g |
| Units | lb, oz, g, kg |
| Tare Range | Full capacity |
| Auto-Off | Yes |
| Tare Function | Yes |
| Capacity | 13 lb / 6 kg |
| Power Source | 2 AAA batteries (included) |
| Accuracy | ±0.1 oz / ±1 g |
Place the scale on a level surface and press the ON/OFF switch to activate the scale.
Wait for the LCD display to show "0" before adding items for weighing.
Gently place items onto the weighing platform for accurate measurement.
Press the "Kg/Lb" button to switch between kg/g and lb/oz units.
Turn on the scale and prepare for tare weighing.
Place the container or tare item onto the platform.
Press TARE and wait for [0.0] to be displayed, setting the tare weight.
Add the net-weight-item after the tare function is set.
Press the "HOLD" button to engage the hold function; "HOLD" symbol appears.
Scale beeps upon storing weight; weight shown for 5 seconds after removal.
Press the "HOLD" button again to clear the stored hold value.
Addresses issues like blank screen [LO] (low battery) and [EEEE] (overload).
Details capacity, graduation, units, calibration, tare range, auto-off, and display.
To Next Page