Need help?Do you have a question about the Amersham Biosciences AKTA design P-960 and is the answer not in the manual?
General| Max Flow Rate | 100 ml/min |
|---|---|
| Display | LCD |
| Power Requirements | 100-240 V, 50/60 Hz |
| Fraction collection | Yes |
| Flow rate range | 0.1 to 100 ml/min |
| Conductivity monitoring | Yes |
| pH monitoring | Optional |
| Temperature Range | 4 to 40 °C |
| Pump Heads | 2 |
| Materials in Contact with Solvents | Stainless steel, PEEK, PTFE |
| Communication Interface | RS-232, Ethernet |
To Next Page
