Need help?Do you have a question about the Amersham Frac-950 and is the answer not in the manual?
General| Type | Fraction Collector |
|---|---|
| Model | Frac-950 |
| Interface | RS-232 |
| Collection Method | Time-based |
| Collection Volume Range | 0.1 mL to 999.9 ml |
| Tube Size Compatibility | 10 mm to 25 mm diameter |
| Collection Modes | peak |
| Power Requirements | 100-240 V, 50/60 Hz |
| Manufacturer | Amersham Biosciences |
Overview of the Frac-950's functionality and intended use.
Critical safety precautions and warnings for operating the Frac-950.
Instructions for unpacking and inspecting the Frac-950 unit.
Guidelines on environmental conditions and placement for the unit.
Introduces the different types of tube racks and their configurations.
Step-by-step guide for fitting standard and prep mode tube racks into the holder.
Instructions for connecting capillaries for DropSync and accumulator use.
Procedures for connecting and managing waste tubing.
How to connect the DropSync and Accumulator cables.
Details on establishing communication with the control system.
Instructions for connecting the unit to the mains power supply.
Guide for loading collection tubes into the rack.
Steps to convert the Frac-950 between standard and prep operational modes.
Instructions for installing the specific Funnel-to-flask accessory kit.
Steps to convert the Frac-950 from prep back to standard operational mode.
How to power the Frac-950 on and off and understand indicator lights.
Overview of controlling the Frac-950 via UNICORN software.
Details on collecting fractions based on fixed volume or time intervals.
Instructions for collecting fractions based on detected peaks.
Using the FeedTube instruction to advance the tube rack.
How to skip the last tube in a sequence when continuing collection.
Resets the fraction collector to the first tube position.
Procedure for manually washing the accumulator unit.
Configuring the delay volume in UNICORN for accurate fractionation.
Options for managing liquid flow during tube changes (Tube, DropSync, Accumulator).
Setting rack and tube parameters within a UNICORN method.
Information on the requirement for periodic maintenance.
Daily cleaning and inspection procedures for the unit.
Guidance on when and how to replace the unit's capillaries.
Guidance on replacing the waste tubing when it shows wear.
Lists common faults and their suggested solutions.
General description of the Frac-950 instrument and its operational modes.
Lists operating data, flow limits, and environmental requirements.
Details on available rack designations, types, and tube combinations.
Specifications including degree of protection, materials, and dimensions.
Lists available accessories and consumable parts for the Frac-950.
Quick checklist for manual control of fraction collection using UNICORN.
To Next Page