©2016 The Ames Companies, Inc. GR4855 (9/16)
ITEM
ART.
QTY
CANT.
DESCRIPTION DESCRIPCIÓN PART NUMBER
NÚMERO DE PIEZA
1 1 Leader Hose Extensión de manguera 2517103
2
4 Anchors, Washers, and Nuts Anclajes, arandelas, y tuercas ---
4 Lag Screws and Washers Pijas y arandelas ---
3 1 Crank Knob, Washer, and Screw Botón de manivela, arandela, y tornillo 07763
4 1 Inlet Tube with Seals Tubería de entrada con sellos RD-HSE-03205
5 1 Locking Lever Palanca de cierre 07765
For replacement parts, contact:
Para obtener piezas de repuesto, contacte:
IN THE US: EN EE. UU.:
The Ames Companies, Inc.
465 Railroad Ave.
Camp Hill, PA 17011
1-800-393-1846
www.ames.com
IN CANADA: EN CANADÁ:
Garant
375, Chemin Saint-Francois Ouest
Saint-François (Québec)
G0R 3A0, Canada
1-800-463-7040
ASSEMBLY: ENSAMBLAJE:
Tools Required:
#2 Phillips Screwdriver
Instructions:
• Place Crank Knob over its mounting. Reference Figure 1.
• Secure in place using washer and screw provided.
Herramientas requeridas:
Destornillador Phillips #2
Instrucciones:
• Coloque el botón de manivela sobre su base. Ver Figura 1.
• Fíjelo en su lugar con la arandela y el tornillo incluido.
Attaching the Crank Knob
Fijación del botón de manivela
Figure 1
Figura 1
1
2
3
4
5
Figure 2
Figura 2
Using the Swivel Function
DO NOT pull or open the unit without disengaging the locking mechanism rst.
• This unit is designed with a locking mechanism that allows you to reposition the reel as needed.
• Lift the locking knob as seen in Figure 2 to release the pivot hinge. This will allow you to rotate the
reel to the next locking position. The hinge will automatically lock in the new position.
• By lifting the locking knob and turning counter-clockwise, the lock is disengaged completely. This
allows the unit to freely rotate.
• To re-engage the lock, lift the locking knob once again and rotate clockwise. The unit will lock in the
next locking position.
Swivel Function
Función Giratoria
⚠
CAUTION
Other components may be identied by
part numbers marked on the part.
Anchors for masonry application only.
Otros componentes pueden estar identi-
cados con un número en la pieza.
Los anclajes son sólo para aplicarlos sobre
mampostería.
To Next Page
Loading...
