Ametek 7270 - Page 219

Index
Index
INDEX-1
? command 6-20, E-1
\N n command 6-34, E-16
8-bit programmable output port 3-15
A input connector 4-1
AC Gain
and Auto-Measure 3-17, 5-28
and Auto-Sensitivity 5-28
and dynamic reserve 5-6, 5-62, 5-80
and full scale sensitivity 3-5
and input overload 3-5, 3-13
AUTOMATIC control 3-5, 5-11
control 5-4, 5-5
description of 3-4
Accuracy 3-17
ACGAIN [n] command 6-12, E-1
ADC
sampling frequency 3-6
trigger input 4-7, 4-8
ADC Menu 5-50
ADC TRIG IN connector 4-7
ADC[.] n command 6-26, E-1
ADC1
auxiliary input 3-15
connector 4-7
ADC2
auxiliary input 3-15
connector 4-7
ADC3
auxiliary input 3-15
connector 4-7
ADC4
auxiliary input 3-15
connector 4-7
ADF n command 6-36, D-1, E-1
AMCENTERV[.] [n] command 6-23, E-1
AMDEPTH [n] command 6-23, E-2
AMFILTER [n] command 6-23, E-2
AMSOURCE [n] command 6-23, E-2
AMVSPAN[.] [n] command 6-23, E-2
Analog outputs (DACs) 3-14
Analog to digital converter (ADC) 3-7
Anti-aliasing filter 3-6
AQN command 6-14, E-2
AS command 6-12, E-2
ASM command 6-12, E-2
ASTART[.] [n] command 6-21, E-2
ASTEP[.] [n] command 6-21, E-2
ASTOP[.] [n] command 6-21, E-2
Auto functions
Auto-Default 3-17, 5-29
Auto-Measure 3-17, 5-7, 5-28
Auto-Measure 1 5-63, 5-81
Auto-Measure 2 5-63, 5-81
Auto-Offset 3-16, 5-28
Auto-Offset 1 5-88
Auto-Offset 2 5-89
Auto-Phase 3-16, 5-14, 5-27
Auto-Phase 1 5-67, 5-71
Auto-Phase 2 5-67
Auto-Sensitivity 3-15, 5-27
introduction 3-15
AUTOMATIC [n] command 6-12, E-3
AUX DAC 1 control 5-7, 5-63, 5-81
AUX DAC 2 control 5-7, 5-63, 5-81
AUX DAC 3 control 5-7, 5-63, 5-81
AUX DAC 4 control 5-7, 5-63, 5-81
Auxiliary ADC's 4-7
AXO command 6-17, E-3
B (I) input connector 4-1
Bipolar input device 3-3
Block diagram 3-2
BYTE [n] command 6-26, E-3
C1 n
1
[n
2
] command 6-20, E-3
C2 n
1
[n
2
] command 6-20, E-3
CBD [n] command 6-27, E-3
CH n
1
[n
2
] command 6-24, E-4
CMODE command 6-26, E-5
Command formats 6-9
Commands
alphabetical listing of E-1
compound commands 6-1
delimiters 6-4, 6-6, 6-9
floating point mode 6-10
for analog outputs 6-24
for Auto-Default function and calibration 6-36
for auxiliary inputs 6-26
for computer interfaces 6-33
for data curve buffer 6-26
for digital I/O 6-25
for dual harmonic mode 6-36
for dual reference mode 6-36
for front panel control 6-35
for instrument identification 6-35
for instrument outputs 6-18