Ametek AMP 200N - Page 54

AMETEK CTS AMP 200N series
Manual for Operation V 4.0.3 54 / 60
Inverted setup with swapped voltage and current inputs
This setup can be used to increase the sensitivity on the voltage measurement. The current input offers higher
sensitivity (100 mV / A or 100 mV / V) compared to the voltage input.
Voltage Monitor
In this case the internal AMP 200N voltage measuring
input is used (4mm lab connector input).
Current Monitor
In this case the internal AMP 200N current measuring
input is used (BNC connector input).