Ametek Amrel PLA Series - Page 139

M470039-01 REV-F Page 138
MODe:RANGe <n>
MODe:RANGe <n>
MODe:RANGe? <MODE>
MODe:RANGe? <MODE>
SYST:RANGe[?]
SYST:RANGe[?]
UTIL:STEP:LOOP[?]
<VAL>
UTIL:STEP:LOOP[?]
<VAL>
0 (Infinity) ~ 99
0 (Infinity) ~ 65535
UTIL:STEP:COUNT[?]
<VAL>
UTIL:STEP:COUNT[?]
<VAL>
1 ~ 99
1~256
STEP:TIME[?] <STEP
COUNT> <VAL>
STEP:TIME[?] <STEP
COUNT> <VAL>
Step Count - 0~99;
VAL (Step Time) - 10
~ 600000 ms
Step Count - 1~256;
VAL (Step Time) - 0 ~
65535 ms
STEP:VALue <STEP
COUNT> <VALUE>
STEP:VALue <STEP
COUNT> <VALUE>
Step Count - 0~99;
Step Value - Min to
Max Value of Mode
& Range
Step Count - 1~256;
Step Value - Min to
Max Value of Mode &
Range
UTIL:MEAS:SENSE
UTIL:MEAS:SENSE
UTIL:EOI
UTIL:EOI
UTIL:TR:MODE
UTIL:TR:MODE
0 – CONTINUOUS;
1 – STEPPING;
2 – PULSE;
3 – TOGGLE
0 - TRIGger;
1 - CONTinuous;
2 - TOGGle;
3 - PULSe;
4 - STEP; 5 - AUTO;
6 - ONCE
Note: Using PEL
command to select
transient mode will
limit the transient
operation to only PEL
selections
UTIL:CURR[?] <VAL>
UTIL:CURR[?] <VAL>
UTIL:RANG[?] <VAL>
UTIL:RANG[?] <VAL>