Ametek LAND LSP HD Series - Default Chapter; Table of Contents

Contents
User Guide LSPHD Linescanner Head
Contents
Preface
1 Introduction 1
1.1 Nomenclature 2
1.2 Specications-LSPHD Series 3
2 Installation 8
2.1 Introduction 8
2.2 Changing the focus distance 9
2.3 Positioning The Scanner 10
2.4 Scan Widths and Target Size 11
2.5 Alignment and Scan Direction 14
2.6 Installation Precautions 15
3 Services 16
3.1 Electrical connections: Cable requirements 16
3.2 WaterRequirements(Water-CooledUnitsOnly) 17
3.3 AirRequirements(Air-Purged/CooledUnitsOnly) 18
4 Laser Alignment 19
4.1 UsingtheLaserAlignmentUnit 20
5 Emissivity-TypicalValues 21
5.1 SettingtheEmissivityvalue 21
5.2 LSPHD 1 Series 23
5.4 LSPHD 5 Series 23
5.3 LSPHD 2 Series 23
5.5 LSPHD 6 Series 24
5.6 LSPHD7Series 24
6 SettingtheScanFrequency 25
6.1 ChangingtheScanFrequencysettingusingtheinternalswitch 25
6.2 ScanFrequencyTable 26
6.3 ScanLineSeparation 27
6.4 DataStorageRequirements 27
6.5 SkewAngle 28
7 InternalAmbientTemperatureSensor 29
7.1 Introduction 29
8 Maintenance 30
8.1 Air Purge Services 30
8.2 Water And Air Cooling Services 30
8.3 PlateMountedBlowerUnit 30
9 Installation Accessories 31
10 SoftwareVersionInformation 32
10.1 Reading the WCA program version 32
10.2 ReadingtheLSP-HDScannerversioninformation 33
10.3 ReadingtheIOversioninformation 34