Ametek Sorensen DHP Series - Table 2-1 2 Kw to 3 Kw High Series Input;Output Connectors; Table 2-2 5 Kw to 15 Kw and 16 Kw to 30 Kw Series Input;Output Connectors

Follow the instructions in paragraph 3-2 for setup and operation of the equipment.
Table 2-1
2kW to 3kW High Series Input/Output Connectors
CONNECTOR FUNCTION CONNECTS TO
FL1 - AC
FL1 – AC
FL1-AC
CHASSIS - GND
Pos. Bus Bar
Neg. Bus Bar
Pos. Threaded Stud
Neg. Threaded Stud
(>=80V)
J1
Prime Power Input
(Std)
(with opt. 3 phase)
Output Power
(see Table 2-3)
(see Table 2-3)
Control Interface
190-253 VAC (Std)
47-63 Hz
Power Source
User load(s)
See Table 3-2 for
description
Table 2-2
5kW to 15kW and 16kW to 30kW Series Input/Output Connectors
CONNECTOR FUNCTION CONNECTS TO
FL1 - AC
FL1 - AC
FL1 - AC
CHASSIS - GND
Pos. Bus Bar
Neg. Bus Bar
(<=60V)
Pos. Threaded Stud
Neg. Threaded Stud
(>=80V)
J1
Prime Power Input
(Std)
Output Power
(see Table 2-3)
(see Table 2-3)
Control Interface
200-240 VAC (Std)
47-63 Hz
360-440 VAC (option)
432-528 VAC (option)
User load(s)
See Table 3-2 for a
Description
M550004-01
2-2