SCPI CONTROL OPTIONS (Optional) This will only
display when a SCPI option is installed. Details on use
of this option are included in the SCPI Option User’s
Manual.
INT DATA The internal data menu provides
information about the internal operation of the power
supply. To access this function, cycle the MENU
button to INT data, then scroll using the arrow key to view each data item. The
following list identifies the six data items provided.
AC Input Now This displays the current AC input voltage of the power supply.
AC Input Maximum This displays the maximum input voltage recorded for the
power supply.
Air Temp Now This displays the current inlet air temperature for the power supply.
Air Temp Max This displays the maximum recorded air temperature for the power
supply.
Fault Counts This displays
recorded faults that may have
occurred in the power supply.
This display consists of eight
integers. From left to right they
represent:
Firmware This display identifies the software and revision level currently used in the
power supply. Also included is a date code indicating the implementation date of
the revision level.
POWER SUPPLY CALIBRATION The DHP Series of
power supplies can be fully calibrated without removal
of any covers and with very little specialized
equipment. This menu selection begins the calibration process. For full instructions on
calibration of this power supply, please refer to the calibration section.
WARNING
Do not enter this mode unless you plan to
fully calibrate the supply.
Entering the calibration mode will change all
calibration constants of the power supply.
Improper completion of the calibration may
lead to incorrect operation of the supply.
M550004-01
3-5
To Next Page
Loading...
