Ametek Sorensen SG Series - Page 73

SG Series Programming SCPI Command Operation
M550129-03 Rev L 6-7
Error Code
Description
-330
Self-test failed
A self-test failure has occurred.
-340
Calibration failed
Error during calculation of calibration values occurred.
-350
Queue overflow
The error queue can contain up to 10 entries. If more than 10 error/event
conditions are logged before the SYSTem:ERRor? query, an overflow will
occur; the last queue entry will be overwritten with error -350. When the
queue overflows, the least recent error/events remain in the queue and the
most recent error/events are discarded.
-360
Communication error
Communications to a channel was disrupted.