Ametek Sorensen XG 100-15 - Page 323

M370430-01 Rev F A-31
A
APPENDIX A SCPI Command Reference
Table A-10 Status Commands (Continued)
Preset Enable,
Positive
Transition and
Negative
Transition
Status
Registers
[:]STATus[<channel>]:PRESet
Restores the configuration of
the SCPI status registers to
known reporting conditions,
IE Transition registers and
enable register. See “Status
Reporting in SCPI” on page
5-29 for more details.
Query
Questionable
Status Register
[:]STATus[<channel>]:QUEStionable
{:EVENt]?
Query the Questionable
Status Register
Yes
Set
Questionable
Status Enable
Register
[:]STATus[<channel>]:QUEStionable
:ENABle <status-enable> {?}
Access the Questionable
Status Register.
Yes
Query
Questionable
Status
Condition
Register
[:]STATus[<channel>]:QUEStionable
:CONDition?
Query the Questionable
Status Register Condition
Yes
Set
Questionable
Status
Negative
Transition
Register
[:]STATus[<channel>]:QUEStionable
:NTRansition
Access the Questionable
Negative Trans Filter
Register. See Table 5-15 on
page 5-42.
?|<Transition Flags -
(0–65535)>
Yes
Set
Questionable
Status Positive
Transition
Register
[:]STATus[<channel>]:QUEStionable
:PTRansition
Access the Questionable
Positive Trans Filter
Register. See Table 5-15 on
page 5-42.
?|<Transition Flags -
(0–65535)>